News

5 Things You Should Know Before Repairing Your Wetsuit Yourself | An Honest Explanation from a Wetsuit Craftsman

To those thinking, “Can’t I just patch it up with some glue for now?” The most common scenario when a wetsuit tears is, “I just tried patching it up with some glue from the hardware store.” Of course, I understand the sentiment, but from a professional’s perspective, there are really many cases where “it actually makes it harder to fix later.” Here, from the perspective of a workshop that repairs over 1,000 wetsuits a year, I’ve summarized five key points you absolutely need to know before attempting a glue repair yourself. 1. Wetsuit-specific glue and regular glue are completely different Wetsuit fabric (neoprene) is a material subjected to quite harsh conditions—stretching and contracting, water, salt, and temperature changes. Products sold at home improvement stores—such as “wood glue,” “instant adhesive,” and “all-purpose glue”—aren’t designed to withstand these conditions in the first place. They harden too much, causing the surrounding fabric to crack when you move; they only bond the surface, leaving the inside loose; or they degrade and peel off quickly due to seawater and UV rays. In short, they often just “look like they’re stuck for now,” while actually hindering the fabric’s natural stretch and flexibility. 2. The hardest part is “removing” the glue once it’s been applied thickly and liberally. The biggest problem with DIY repairs is when glue has been applied thickly and over a wide area on the fabric. When repairs are done in a factory, the process begins by carefully removing that glue. Forcing it off can damage the fabric itself, so it must be removed little by little over time. As a result, the amount of labor required increases compared to normal, and the space available for a clean finish is reduced due to the remaining glue residue—reasons why the estimate may end up being higher....

5 Things You Should Know Before Repairing Your Wetsuit Yourself | An Honest Explanation from a Wetsuit Craftsman

To those thinking, “Can’t I just patch it up with some glue for now?” The most common scenario when a wetsuit tears is, “I just tried patching it up with some glue from the hardware store.” Of course, I understand the sentiment, but from a professional’s perspective, there are really many cases where “it actually makes it harder to fix later.” Here, from the perspective of a workshop that repairs over 1,000 wetsuits a year, I’ve summarized five key points you absolutely need to know before attempting a glue repair yourself. 1. Wetsuit-specific glue and regular glue are completely different Wetsuit fabric (neoprene) is a material subjected to quite harsh conditions—stretching and contracting, water, salt, and temperature changes. Products sold at home improvement stores—such as “wood glue,” “instant adhesive,” and “all-purpose glue”—aren’t designed to withstand these conditions in the first place. They harden too much, causing the surrounding fabric to crack when you move; they only bond the surface, leaving the inside loose; or they degrade and peel off quickly due to seawater and UV rays. In short, they often just “look like they’re stuck for now,” while actually hindering the fabric’s natural stretch and flexibility. 2. The hardest part is “removing” the glue once it’s been applied thickly and liberally. The biggest problem with DIY repairs is when glue has been applied thickly and over a wide area on the fabric. When repairs are done in a factory, the process begins by carefully removing that glue. Forcing it off can damage the fabric itself, so it must be removed little by little over time. As a result, the amount of labor required increases compared to normal, and the space available for a clean finish is reduced due to the remaining glue residue—reasons why the estimate may end up being higher....